Ships from Illinois, United States

Ships to U.S., Canada, and Other Limited International Countries

Made using Cruelty-Free and Organic Practices & Products

More Information about Fire Aurora Chrome Enhancement Powder

How to use Chrome Powders

1.  Apply a thin coat of Gel Base Coat and cure according to your bottle.

2. Apply a thin coat of Gel Top.

3. Flash cure (approx. 10-15 seconds) Time depends on your lamp and requires trial and error. If using a chrome powder (not chrome dip powder) you can cure half the time you would normally when using your Gel Top.

4.  Apply your chrome powder with an applicator or finger and rub in until you have achieved the desired coverage.

5.  Brush off any excess powder.

6.  Apply No Wipe Top Coat (cap the edge) and cure according to the bottle.

*NOTE: You MUST use a Gel Base before Gel Top as the Top needs a sticky base to adhere correctly to your nails. Not using a Gel Base before Gel Top will cause your Top coat to peel.

Ingredients

Most dip powders contain the following ingredients:

  • Poly(ethyl Methacrylate)
  • Poly(butyl Methacrylate)

Powders may also contain polyester glitters, foils and various pigments.  

While BPO (Benzoyl Peroxide) is not required in dip powder when you use a dip liquid/gel system, some of our dip powders contain BPO. That concentration is less than 5%.

Our Reflective Glitter powders consist of some known allergens, containing the following: Urethane acrylic resin (30-40%), Epoxy acrylic resin (20-30%), Polyester acrylic resin (10-20%), Acrylic (5-30%), Additives (5-10%) And Aluminized layer (0.5-1%)

For external use only.  If an allergic reaction should occur, discontinue use and consult with a licensed physician